Product ID: 2155
V38 Optical Final Polish
Summary:
- Ultra-refined final polish
- Finishes paint to perfection following compounding and polishing steps
- Enhances gloss, depth, and reflection
- Removes light defects, scratches, and holograms
- Delivers permanent results; no fillers, no hiding blemishes
- Removes 2500-3000 grit wet sand marks
About
When only perfection will do at the end of a polishing detail, detailers reach for Chemical Guys V38 Optical Grade Final Polish to refine depth, luster, and gloss. V38 refines compound and polishing marks from prior steps, and enhances reflection, shine, and gloss on any paint finish. V38 works on conventional clear coat, ceramic clear coat, and single stage paint finishes.
Use V38 on any DA or rotary polisher to refine the finish, remove light scuffs and scratches, 2500-3000 grit sanding marks, and any compounding marks or holograms from prior polishing steps. The specialty jeweler’s polish is water-based, formulated for extended work time, and finishes without dusting or messy residue. V38 contains no fillers and no artificial gloss enhancers, so the lustrous finish is the true condition of the paint. Use V38 Optical Grade Final Polish to finish any paint finish to perfection.
Body Shop Safe
V38 Optical Grade Final Polish cuts hard, and cuts fast. Experienced enthusiasts choose V38 for its ability to refine polished surfaces with enhanced gloss and shine, and remove wet sand marks up to 2500-3000 grit. V38 makes short work of light marring, and refines polished surfaces with supreme optical clarity. Pair V38 with any rotary or dual action polisher for premium finishing action that’s safe for any paint type and finish. V38 cuts away light swirls, scratches, oxidation, and wet sand marks, and refines the finish to a brilliant deep luster on most paint types.
V38 works great on all paint types, including clear coat, ceramic clear coats, and single stage paints. Use Chemical Guys V38 Optical Grade Final Polish for premium finishing with enhanced gloss and shine on any paint type.
Directions:
Work on cool surface. Shake Well. Always work 2’ x 2’ section at a time.
DA application
- Apply 4-5 drops to desired pad.
- Spread on speed setting 1. Set DA machine to 5-6.
- Using moderate pressure work area in 2-3 passes till polish becomes clear.
- Follow with light pressure to finish.
- Remove residue with clean microfiber cloth.
Rotary Application
- Apply 4-5 drops to desired pad.
- Prime pad with Chemical Guys Quick Detail Spray.
- Set machine to between 1000-1500 rpms to spread product.
- Work 2’x2’ area at a time. Using just the weight of the machine (no pressure) work area in 3-4 passes till polish becomes clear.
-
For final pass adjust speed setting to between 1500-1800 rpms. Work till optical clarity is achieved.
- Remove residue with clean microfiber cloth.
GAP_V38_16